Aprilaire E080 Dehumidifier Installation Manual
The Aprilaire Model E080 Dehumidifier is a compact unit perfect for townhouses, condos and homes with a closet HVAC unit. … Owners Manual Delivers Best-in-Class Humidity Control Model E080 Features⁚ Recognized as the Most … Installation instructions. Dehumidifier. 5881 Filter. Torx Bit 10 1/2 Screws (9) Drain Connection.
Introduction
This installation and owner’s manual provides the instructions for installing and operating the Aprilaire Model E080 and E100 dehumidifiers. These units are designed to provide whole-house dehumidification, offering a professional-grade solution for maintaining optimal humidity levels in your home. The E080 and E100 dehumidifiers are designed for ease of use and installation, featuring a compact design that fits conveniently in closets or other discreet locations. The manual covers various aspects of installation, including leveling and raising the dehumidifier, installing the drain, ducting the dehumidifier inlet and outlet to the HVAC system, and wiring to the HVAC system. It also provides information on troubleshooting common issues, service parts, warranty details, and external control options for convenient operation.
Safety Instructions
Before installing or servicing the Aprilaire E080 and E100 dehumidifiers, it is crucial to prioritize safety by following these instructions⁚
Electrical Safety⁚ Disconnect the electrical power supply before commencing any installation or servicing procedures. Ensure that the power remains disconnected until the installation or service is fully completed. Failure to do so could result in serious injury due to electric shock.
Sharp Edges⁚ The dehumidifier may contain sharp edges that could cause cuts. Exercise caution when handling the unit and use appropriate protective gear, such as gloves, to prevent injuries.
Proper Ventilation⁚ Ensure adequate ventilation during installation and operation to prevent the accumulation of condensation or moisture, which could lead to mold growth or other issues.
Professional Installation⁚ It is strongly recommended to have the dehumidifier installed by a qualified HVAC technician for safe and efficient operation.
Installation Instructions
Installing the Aprilaire E080 dehumidifier requires a few key steps to ensure proper functionality and efficiency. The following instructions outline the essential procedures⁚
Leveling and Raising the Dehumidifier⁚ Adjust the feet of the unit to level it properly and accommodate any necessary drain fittings or condensate pans. The top-mounted bubble level will help you achieve accurate leveling. Ensure that the unit is positioned to allow for easy access to electrical service and drain cleaning.
Installing the Drain⁚ Connect the drain hose to the dehumidifier outlet, using a tee or three-way elbow for proper drainage. Ensure that the drain line is properly sloped to prevent backflow.
Ducting the Dehumidifier Inlet and Outlet to the HVAC System⁚ Connect the dehumidifier inlet and outlet to the HVAC system using insulated ducts. The inlet should be connected to the return air duct, while the outlet should be connected to the supply air duct. Ensure that the ductwork is properly sized and sealed to prevent air leaks.
Wiring to the HVAC System⁚ Connect the dehumidifier to the HVAC system using appropriate wiring. Refer to the installation instructions for the specific control being used for detailed wiring information.
Leveling and Raising the Dehumidifier
Proper leveling is crucial for the efficient operation of the Aprilaire E080 dehumidifier; The adjustable feet allow you to fine-tune the unit’s position to ensure stability and prevent uneven water distribution. Begin by placing the dehumidifier in its desired location, taking into consideration the proximity to the drain and electrical outlet.
Use the top-mounted bubble level to guide the adjustment of the feet. The bubble should be centered within the outer circle of the level. Once the unit is level, double-check the position of the drain fittings and condensate pans, ensuring they are correctly aligned and secured.
If the dehumidifier needs to be raised to accommodate specific installations, use appropriate leveling blocks or shims. Ensure that the blocks or shims are sturdy and provide a stable platform for the dehumidifier. Remember that raising the unit might necessitate adjustments to the drain hose length to maintain proper drainage.
Installing the Drain
The Aprilaire E080 dehumidifier requires a properly installed drain system to collect and remove condensate effectively. The drain system should be routed to a suitable drainage point, such as a floor drain or an exterior drain.
Begin by connecting the drain hose to the dehumidifier outlet. Ensure a secure connection to prevent leaks. Route the drain hose to the chosen drainage point, ensuring a downward slope to facilitate gravity drainage.
For floor drains, attach the drain hose to the drain fitting using a hose clamp. If routing the drain hose to an exterior drain, consider using a dedicated drain line or a dedicated drain pipe. Ensure the drain line is properly insulated to prevent freezing in cold climates.
Finally, secure the drain hose to prevent it from being accidentally disconnected or pulled out. You can use hose clamps, zip ties, or other appropriate methods to secure the hose to the drain fitting and along the routing path.
Ducting the Dehumidifier Inlet and Outlet to the HVAC System
Properly ducting the Aprilaire E080 dehumidifier to the HVAC system is crucial for efficient operation and optimal humidity control. The dehumidifier’s inlet and outlet should be connected to the HVAC system’s return and supply ducts, respectively.
For the inlet, connect the dehumidifier’s inlet duct collar to the HVAC system’s return duct. This allows the dehumidifier to draw in humid air from the house. Use appropriate ductwork materials and secure connections to prevent air leakage.
For the outlet, connect the dehumidifier’s outlet duct collar to the HVAC system’s supply duct. This directs the dehumidified air back into the house. Ensure the outlet ductwork is properly sealed to prevent air loss and maintain air pressure.
When ducting the dehumidifier, consider the air flow requirements and the location of the HVAC system. Ensure sufficient airflow to the dehumidifier for optimal performance. Consult the installation manual for specific duct sizing recommendations and ensure the ductwork is properly sealed and insulated to prevent air leakage and condensation.
Wiring to the HVAC System
Connecting the Aprilaire E080 dehumidifier to the HVAC system involves proper wiring to ensure the unit operates correctly. The wiring process typically involves connecting the dehumidifier’s control wiring to the HVAC system’s control board, enabling communication between the two systems.
The dehumidifier’s control wiring should be connected to the appropriate terminals on the HVAC system’s control board, as specified in the installation manual. The wiring must adhere to local electrical codes and safety regulations. Use the correct gauge wire and ensure all connections are secure.
Before connecting any wires, disconnect power to both the dehumidifier and the HVAC system. This precaution is essential for safety. Always double-check the wiring connections and ensure that all terminals are properly secured. Once the wiring is complete, restore power to the dehumidifier and HVAC system and test the system’s functionality to confirm the dehumidifier is working correctly.
Troubleshooting
If you encounter issues with your Aprilaire E080 dehumidifier, there are several troubleshooting steps you can take before contacting customer support.
First, ensure that the power cord is plugged in securely and that the circuit breaker is not tripped. Check the dehumidifier’s display for any error codes, as these provide valuable information regarding the problem. Consult the troubleshooting guide in the manual to interpret the error codes and identify possible solutions.
Inspect the air filter for any clogs or dirt buildup. A dirty filter can restrict airflow and affect the dehumidifier’s performance. If the drain hose is clogged, it can prevent water from draining properly, leading to overflow. Clean or replace the drain hose as needed.
Lastly, ensure the dehumidifier is positioned properly. If it is too close to a wall or other obstruction, it might not function efficiently. If the issue persists, contact Aprilaire customer support for assistance.
Service Parts
To ensure your Aprilaire E080 dehumidifier functions optimally, it’s essential to have access to the correct service parts when needed. The manual provides a comprehensive list of service parts, including their corresponding part numbers.
This list covers various components, such as filters, sensors, control boards, and other essential parts that might require replacement over time. Having this information readily available simplifies the process of ordering replacement parts.
Aprilaire recommends using genuine service parts to maintain the quality and performance of your dehumidifier. These parts are designed to meet rigorous standards and ensure proper compatibility with your specific model. Utilizing non-genuine parts could potentially compromise the dehumidifier’s effectiveness and void your warranty.
Limited Warranty
Aprilaire stands behind the quality of its products with a limited warranty that covers defects in materials and workmanship. This warranty ensures that if your Aprilaire E080 dehumidifier experiences a manufacturing fault within the specified timeframe, you can receive a replacement or repair at no cost.
The warranty period typically varies depending on the specific component and may cover a certain number of years from the date of purchase. For detailed information regarding the duration of the warranty for each component, refer to the warranty information section within the manual.
It’s important to note that the warranty does not cover damage caused by misuse, neglect, improper installation, or the use of non-genuine parts. To ensure your warranty remains valid, follow the instructions outlined in the manual for proper operation, maintenance, and cleaning.
External Control Options
Enhance the functionality and convenience of your Aprilaire E080 dehumidifier with external control options. These optional controls allow you to manage your dehumidifier from a convenient location, offering greater flexibility and precision in humidity control.
Recommended external control options include the Aprilaire Model 76, 8620, and 8910. The Model 76 is a popular choice for remote control, enabling you to adjust settings, monitor humidity levels, and even schedule dehumidification cycles from the comfort of your living space.
The Aprilaire 8620 Thermostat and 8910 Home Comfort Control provide additional features, such as integration with your home’s HVAC system and the ability to customize humidity settings based on specific time periods or environmental conditions.
By following the installation instructions outlined in this manual, you can successfully integrate the Aprilaire E080 dehumidifier into your HVAC system, ensuring efficient and reliable humidity control throughout your home. Remember to prioritize safety by disconnecting electrical power before starting installation or servicing.
Regular maintenance, including filter replacement and drain cleaning, will optimize the performance of your dehumidifier and extend its lifespan. Should you encounter any issues or require assistance with troubleshooting, consult the troubleshooting guide included in this manual or contact Aprilaire’s technical support for expert guidance.
The Aprilaire E080 dehumidifier, with its robust construction and advanced features, provides a reliable solution to manage moisture levels in your home, creating a healthier and more comfortable living environment for you and your family.